How to choose a veneer

Decorative panel is a common surface decoration material in home decoration, also known as decorative veneer veneer. The decorative panel can be almost the same as the natural wood in the pattern and texture, and it can also avoid the growth defects of the natural wood itself. It can be used as a surface board for making furniture, and it can also be used for interior decoration. Decorative panels are widely used in the surface decoration of homes and public spaces. What are the precautions for everyone when buying decorative panels?

One is the thickness of the skin.

The thicker the veneer, the better the performance. After painting, the real wood feels more real, the texture is clearer, the color is vivid, and the saturation is better. The identification method is whether there is sand penetration at the edge of the kanban, whether there is glue leakage on the board surface, whether there is blue and penetration in the water coating test, if there is, it belongs to the thin plate skin.

The second is the appearance quality.

The surface color is consistent, the surface has no scars, the appearance is good for decoration, the material is fine and uniform, the color is clear, and the wood grain is beautiful. The texture of the matching board and puzzle should be arranged according to the corresponding law, the wood color is similar, and the splicing seam and the board edge are nearly equal. In addition, check whether it is warped and deformed, and whether it is vertical, vertical, and naturally flat. If warping occurs or the board becomes soft or does not stand upright, it is an inferior bottom board.

The third is the glue layer structure.

The structure of the glue layer is stable, and there is no glue opening. The wood leather and the base material should be tightly seamed, and there must be no blistering, delamination or degumming between the wood leather and the base material and the inner layers of the base material. The glue strength can be checked by the knife-pry method, and a sharp flat blade is used to pry open along the glue layer. If the glue layer is damaged but the wood is intact, it indicates that the glue strength is poor.

The fourth is the base layer and the epidermis.

The base layer and surface veneer of the veneer are of better quality. The thickness and moisture content of the base layer should meet the national standards, whether to remove alkali treatment, etc. The thickness of the surface veneer should meet the standard. Don't be too thin. Too thin will be transparent, change, affect the appearance.

The fifth is to identify the smell.

Smell the smell, strong pungent odor, excessive formaldehyde emission, serious pollution of the indoor environment, the more dangerous it is to use indoors. We can request an inspection report from the industry to see if the product meets environmental standards.

Sixth, the brand of decorative panels.

The quality of the panel requires a corresponding time, so when buying it depends on the dealer's operating strength and after-sales service guarantee. Choose the products produced by regular manufacturers, the bottom right corner of the back panel is marked with the type, grade, name of the manufacturer, etc.